I recently found a February 1940 Jackson tube tester modernization bulletin. This bulletin explains the modernization options available for Jackson tube tester models 627, 627-C, 630, 633, 634, 634-C, 634-D, 635, 637, 680. It also includes the wiring diagram to install a Loctal socket into models 627, 630, 633, 635, 680.

Very interesting bulletin for anyone collecting or repairing vintage Jackson tube testers. I have scanned this 4-page document into a PDF for your benefit.

[ Download the Jackson 1940 Modernization Bulletin PDF ]

To summarize the bulletin:

• Models 634 and 637 sold in 1940 were already modernized at the factory
• Models 634 and 637 sold in their first year (1939) can be easily modernized by the owner (see my article on Jackson 634 for modernization data to install 9-pin miniature socket into these models).
• Models 627, 630, 633, 635, and 680 could be sent back to the Jackson factory and modernized for $5.00 (model 633) or $6.50 (models 627, 630, and 635, which dated from 1938), or $12.50 (model 680). All five of these models had to modernized at the factory because they required installation of a supplementary high-voltage filament transformer, among other parts.
• Models 427-A, 435-A, 535, and 580 were too obsolete to be modernized because “no provision for the high voltage filament types can be made. Miniature types cannot be tested.” Jackson noted that these models were “as much as five years old”, which dates them between 1935 and 1940. Jackson recommended upgrading to the new 1940 models of 634 and 637.

If you are only interested in the Loctal socket modernization wiring diagram, see the accompanying thumbnail photo (click photo to enlarge).

Loctal socket modernization

If you appreciate vintage tube test gear, you will enjoy this 1940 vintage Jackson 634 Tube Tester. It is an excellent choice for anyone looking for a quality, well-built, tester that can test the VERY OLD tubes, such as #50, 01A, 1V, #10, 2A3, #15, #19, HY113, HY115, HY125, #26, #45, 71-A, #83, etc.

This article is also relevant to Jackson 637 tester, which is same as model 634 tester with additional integrated multimeter functionality (volts and ohms testing).

(Jackson 634 testing Cunningham CX-350 Globe #50 Triode tube)

What is really “cool” about this tester is its very small size. Measuring only 8.5 x 8.5 x 6 inches and weighing 9 lbs, this unit packs a big punch in a small size!

This tester has been in my personal collection since 1990, and it is the oldest tester in my collection (except for a Supreme 550 Radio Tester from 1936, which also has some basic tube testing capability).

Jackson 634 - 637 modernization bulletin. Click to enlarge.

This tester is so old that it did NOT come with a 9-pin-miniature socket installed — that was too modern!

(Article UPDATE, Nov 3, 2008): I found an original Jackson modernization bulletin, and the Jackson 634 and 637 testers were released in 1939. All 1939 models were sold without the 9-pin-miniature socket installed. The 1940 models were already modernized at the factory.

I have installed a new 9-pin-miniature socket, and will teach you how to “modernize” your 1939 vintage Jackson 634 also. (Jackson sockets are wired unique, and do not correspond to the 1-to-1, 2-to-2, wiring that many testers employ).

Service information and many additional photos are as follows…

(more…)